Flashlight Lamps How To Replace An Led Flashlight Bulb That Is Soldered To Its Switch "component" With A Lightbulb With Wires?
How to replace an led flashlight bulb that is soldered to its switch "component" with a lightbulb with wires? - flashlight lamps
I have a cheap dollar store "finger" flashlight.I has courage and it looks like ... Take 3 small watch batteries (LR41 size). It has a bulb type of soldier has a small board that has a switch with battery covers. My intention is to provide a lamp to my Roomboxes Dollhouse create (an overload of dental light, to be exact). I need to refresh this thing, so you can enable or disable on the walls of the container. Would it be possible to remove the bulb and replace it connected to another son, so I can make the light source inside and outside the distance? Note: I know very little about electronics and soldering.
|
1 comments:
Ok, so first you need a welder and maybe a switch or other heat inside and outside the switch.first gun-welding and welding at the age of light outside the LED and the board and soldering in a separate - and + cable each end and solder in a performance of the battery and turn it off.
Post a Comment